Specifications
- Metallurgical plants with integrated production and process facilities
- Metal processing plants
- Warehouses for rolled products
- Ports
- Cranes
- Lifting beams
- Piecewise cold round metal semi-finished product
Description
A special DIMET IMGK series of electropermanent (pulsed) magnets for the handling of cold round semi-finished products one piece at a time. The magnets are of special design featuring a deep magnetic field as well as special pole supports which increase the contact area. The use of electropermanent magnets provides a high level of safety while handling the loads, because the magnetic field of these magnets is not dependent on sources of electrical energy supply.
A glance at the most important advantages
-
Replacement set for repair
-
Replacement during the two-year warranty period
-
Customer service during the entire service life
-
Lower operating costs
No power is consumed when the magnet is on because the coil only needs to be energized to turn the magnet on and off.
-
Advanced material safety performance
Electric power is only required to switch the magnet. In case of power failure, the load will not fall down and keep on being held for a long time.
-
Prolonged working cycle
For the work of the magnet, continuous mains operation is not necessary, so there is no risk of heat accumulation. Consequently, a high duty cycle and a longer operation cycle are achievable.
-
Steady load carrying capacity
Technical specification
Metric system of measurement
Parameters |
IMGK 160-70-40-U1 |
IMGK 220-66-40-U1 |
IMGK 400-66-44-U1 |
Impulse voltage, V |
230 |
230 |
230 |
Impulse current, A |
40 |
65 |
90 |
Impulse power, W |
9200 |
15000 |
20700 |
Weight, kg |
2200 |
2750 |
5600 |
Pull-off force for circle, kg |
24000 |
33000 |
84000 |
Lifting capacity for circle, kg |
8000 |
11000 |
28000 |
Minimum circle diameter, mm |
300 |
400 |
400 |
Maximum circle diameter, mm |
430 |
550 |
600 |
Dimensions, mm |
1600х700х400 |
2200х660х400 |
4000х660х440 |
Imperial and US customary systems
Parameters |
IMGK 160-70-40-U1 |
IMGK 220-66-40-U1 |
IMGK 400-66-44-U1 |
Impulse voltage, V |
230 |
230 |
230 |
Impulse current, A |
40 |
65 |
90 |
Impulse power, W |
9200 |
15000 |
20700 |
Weight, lbs |
4900 |
6100 |
12400 |
Pull-off force for a circle, lbs |
53000 |
72900 |
185400 |
Lifting capacity for circle, lbs |
17660 |
24300 |
61800 |
Minimum circle diameter, in |
11 |
16 |
16 |
Maximum circle diameter, in |
17 |
21 |
23 |
Dimensions, in |
63x27x15 |
86x26x15 |
157x26x17 |