 (1).jpg)
.jpg)
.jpg)
.jpg)
.jpg "IMGS series")
.jpg "IMGS series")
.jpg "IMGS series")
.jpg "IMGS series")
.jpg "IMGS series")
.jpg "IMGS series")
.jpg "IMGS series")
.jpg "IMGS series")
Specifications
- Metallurgical plants with integrated production and process facilities
- Metal processing plants
- Warehouses for rolled products
- Ports
- Cranes
- Lifting beams
- Sheet steel in bundles or pieces
- Slabs
Description
A special DIMET IMGS series of electropermanent (pulsed) magnets for handling sheet steel one piece at a time. Due to the low depth of the magnetic field, the mass of the equipment is reduced, saving costs in the process in this way. The use of electropermanent magnets provides a high level of safety while handling the loads, because the magnetic field of these magnets is not dependent on sources of electrical energy supply.
A glance at the most important advantages
-
Replacement set for repair -
Replacement during the two-year warranty period -
Customer service during the entire service life
-
Lower operating costs
No power is consumed when the magnet is on because the coil only needs to be energized to turn the magnet on and off.
-
Advanced material safety performance
Electric power is only required to switch the magnet. In case of power failure, the load will not fall down and keep on being held for a long time.
-
Prolonged working cycle
For the work of the magnet, continuous mains operation is not necessary, so there is no risk of heat accumulation. Consequently, a high duty cycle and a longer operation cycle are achievable.
-
Steady load carrying capacity
Technical specification
Metric system of measurement
|
Parameters |
IMGS 075-25-23-U1 |
IMGS 130-37-30-U1 |
IMGS 180-48-31-U1 |
|
Impulse voltage, V |
230 |
230 |
230 |
|
Impulse current, А |
10 |
15 |
32 |
|
Impulse power, W |
2300 |
3500 |
7400 |
|
Weight, kg |
250 |
750 |
1450 |
|
Pull-off force, kg |
7800 |
19000 |
40500 |
|
Lifting capacity for plates, kg |
2600 |
6300 |
13500 |
|
Lifting capacity for sheets, kg |
1500 |
3600 |
7000 |
|
Minimum sheet thickness, mm |
4 |
4,5 |
6 |
|
Dimensions, mm |
750x250x230 |
1300x370x300 |
1800x480x310 |
Imperial and US customary systems
|
Parameters |
IMGS 075-25-23-U1 |
IMGS 130-37-30-U |
IMGS 180-48-31-U1 |
|
Impulse voltage, V |
230 |
230 |
230 |
|
Impulse current, A |
10 |
15 |
32 |
|
Impulse power, W |
2300 |
3500 |
7400 |
|
Weight, lbs |
550 |
1650 |
3200 |
|
Pull-off force, lbs |
17200 |
42000 |
89400 |
|
Lifting capacity for a plate, lbs |
5740 |
13900 |
29800 |
|
Lifting capacity for sheet, lbs |
3300 |
7950 |
15450 |
|
Minimum sheet thickness, in |
0,15 |
0,17 |
0,23 |
|
Dimensions, in |
29x10x9 |
51x3x12 |
71x19x12 |
